Address: Lixia District, Jinan City, Shandong Province
High Class Grade Birch Plywood Use for Industrial
|Place of Origin:||Shandong|
|Payment Terms:||L/C,D/A,T/T,Western Union|
|Size||1220x2440mm, 1250x2500mm, 915x1830mm or as clients requirement|
|Face/Back||National film (black or brown), imported dynea brown film or anti-slip film (black or brown)|
|Film Gram||65g/m2 (black film), 70g/m2 (brown film)|
|Core||Poplar, hardwood, eucalyptus, birch, pine, combi, ect.|
|Joint Way of The Core||Overlap joint, end joint, scarf joint or finger joint|
|Edge Treatment||Sealed by waterproof paint|
|Glue||MR, Melamine or WBP|
|Grade||One time hot press, two time hot press or finger joint|
|Technical Parameters||Moisture Content||10%~15%|
|Modulus of Elasticity||≥5000Mpa|
|Static Bending Strength||≥30Mpa|
|Surface Bonding Strength||≥1.60Mpa|
|Internal Bonding Strength||≥0.90Mpa|
|Screw Holding Ability||Face||≥1900N|
1. In boiling water, it can keep glue-sticking and non-deformed for 60 hours at least.
2. If used abide by the illustrations strictly.it can be reused more than 50 times.
3.Reducing the cost greatly and avoiding the disadvantages from rustily and erosive of iron mould.
4. Realizing a higher economic profits.
5.Have a smooth, double-sided phenolic film overlay and sealed edges.